Design, construction, installation and alteration: Difference between revisions
From Riverview Legal Group
Access restrictions were established for this page. If you see this message, you have no access to this page.
(Created page with "Category: Fire Code 2.6.3.1. (1) The design, construction, installation and alteration of indoor incinerators shall conform to the requirements of the Building Code. (...") |
No edit summary |
||
| Line 4: | Line 4: | ||
(2) The design, construction, installation, alteration and maintenance of outdoor incinerators shall conform to NFPA 82, “Standard on Incinerators and Waste and Linen Handling Systems and Equipment”, except that the flue venting an incinerator shall not serve as the chute conveying waste material to the incinerator. | (2) The design, construction, installation, alteration and maintenance of outdoor incinerators shall conform to NFPA 82, “Standard on Incinerators and Waste and Linen Handling Systems and Equipment”, except that the flue venting an incinerator shall not serve as the chute conveying waste material to the incinerator. | ||
Back to [[Service Equipment]] | |||
<ref name="FC">O. Reg. 213/07: FIRE CODE, <https://www.ontario.ca/laws/regulation/070213>, reterived September 17, 2020</ref> | |||
==References== | |||
Latest revision as of 00:11, 22 September 2020
2.6.3.1. (1) The design, construction, installation and alteration of indoor incinerators shall conform to the requirements of the Building Code.
(2) The design, construction, installation, alteration and maintenance of outdoor incinerators shall conform to NFPA 82, “Standard on Incinerators and Waste and Linen Handling Systems and Equipment”, except that the flue venting an incinerator shall not serve as the chute conveying waste material to the incinerator.
Back to Service Equipment
References
- ↑ O. Reg. 213/07: FIRE CODE, <https://www.ontario.ca/laws/regulation/070213>, reterived September 17, 2020
