Precautions during repairs or renovations: Difference between revisions
From Riverview Legal Group
Access restrictions were established for this page. If you see this message, you have no access to this page.
(Created page with "Category: Fire Code 2.6.1.10. (1) No work on ducts involving the use of hot work equipment shall be performed unless :(a) the system has been shut down, :(b) the duct h...") |
No edit summary |
||
| Line 7: | Line 7: | ||
2.6.1.11. Precautions shall be taken, where necessary, to ensure that there is no damage to fuel supply piping or equipment that would result in fuel leakage or a fire hazard during renovations or excavations. | 2.6.1.11. Precautions shall be taken, where necessary, to ensure that there is no damage to fuel supply piping or equipment that would result in fuel leakage or a fire hazard during renovations or excavations. | ||
Back to [[Service Equipment]] | |||
<ref name="FC">O. Reg. 213/07: FIRE CODE, <https://www.ontario.ca/laws/regulation/070213>, reterived September 17, 2020</ref> | |||
==References== | |||
Latest revision as of 00:10, 22 September 2020
2.6.1.10. (1) No work on ducts involving the use of hot work equipment shall be performed unless
- (a) the system has been shut down,
- (b) the duct has been cleaned of any accumulations of combustible deposits, and
- (c) any combustible lining and covering material that could be ignited by the work has been removed.
2.6.1.11. Precautions shall be taken, where necessary, to ensure that there is no damage to fuel supply piping or equipment that would result in fuel leakage or a fire hazard during renovations or excavations.
Back to Service Equipment
References
- ↑ O. Reg. 213/07: FIRE CODE, <https://www.ontario.ca/laws/regulation/070213>, reterived September 17, 2020
